Proyek PISP (Participatory Irrigation Sector Project)Dalam kontrak disebutkan halhal sebagai berikut :This Contract (hereinafter called the Contract) is made on the 6th dayof the month of December, 2006 between, on the hand, DirectorateGeneral of Water Resources (DGWR), Ministry of Public Works, Republicof Indonesia (hereinafter called the Client) and, on the other hand aJoint Venture consisting of the following entities, each of which will bejointly and severally liable to the Client for all the

DDCConsultants (hereinafter collectivelly called the Consultant).Sedangkan dalam General Condition of Contract juga dijelaskan bahwaJoint Venture means a Consultant which compries two or morePeartners each of wich will be jointly and severally liable to the Client forall the Consultants obligations under the Contract.a) Dasar Hukum= UndangUndang Nomor 18 Tahun 2000 tentang Perubahan KeduaAtas UndangUndang Nomor 8 Tahun 1983 tentang PajakHalaman 3 dari 15 halaman Putusan Nomor 1069/C/PK/PJK/2014Pertambahan

Proyek PISP (Participatory Irrigation Sector Project)Dalam kontrak disebutkan halhal sebagai berikut :This Contract (hereinafter called the Contract) is made on the 6th dayof the month of December, 2006 between, on the hand, DirectorateGeneral of Water Resources (DGWR), Ministry of Public Works, Republicof Indonesia (hereinafter called the Client) and, on the other hand aHalaman 9 dari 15 halaman Putusan Nomor 1069/C/PK/PJK/2014Joint Venture consisting of the following entities, each of which will

DDCConsultants (hereinafter collectivelly called the Consultant).Sedangkan dalam General Condition of Contract juga dijelaskan bahwaJoint Venture means a Consultant which compries two or morePeartners each of wich will be jointly and severally liable to the Client forall the Consultants obligations under the Contract.d) Dasar Hukum= UndangUndang Nomor 18 Tahun 2000 tentang Perubahan KeduaAtas UndangUndang Nomor 8 Tahun 1983 tentang PajakPertambahan Nilai Barang Dan Jasa Dan Pajak Penjualan AtasBarang

Canada Borders Service Agency, Statement Of Reason ,Ottawa Nov Dec 92002The distinctive feature of waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give waterproof protection to thefoot, are incorporated into a single component which may be made of rubberor plastic diterjemahkan ciri knas alas kaki tahan air adalah kedua bagiansol dan bagian atasnya mampu memberikan perlindungan tahan airterhadap kaki, terbentuk dalam komponen tunggal yang terbuat dari

kelihatanmemenuhi syarat kedua karena pembuatannya dengan cara injectionmoulding, karena untuk masuk pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusuk ataudengan cara semacam itu.Bahwa pada penjelasan pos 64.02 pada halaman XII 64021 ExplanatoryNotes, Fifth Edition , Volume 3, dinyatakan : The Heading covers, interalia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(6) Clogs without quarter or counter, the uppers of which

are produced inone piece usually attached to the base or platform by riveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching, areattached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter or heelstrapattached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;Halaman 16 dari 19 halaman Putusan

Banding, lebih lanjut, dalam Overleaf Note Attachment C dariACFT A point 3 dinyatakan sbb:ORIGIN CRITERIA: For exports to the above mentioned countries to be eligible forpreferential treatment, the requirement is that either: (i) The products wholly obtained in theexporting member state as defined in Rule 3 of theASEAN China ROO;(ii) Subject to subparagraph (i) above, for the purpose of implementing theprovisions of Rule 2(b) of the ASEAN China ROO, products worked on andprocessed as a result of which

the total value of the materials, parts or produceoriginating from non ACFTA member states or of undetermined origin used doesnot exceed 60% of the FOB Value of the product produced or obtained and thefinal process of the manufacture is performed within territory of the exportingmember state;(iii) Products which comply with origin requirements provided for Rule 2 of theASEAN China ROO and which are used in a member state as inputs for finishedproduct eligible for preferential treatment in another

member state/states shall beconsidered as a product originating in the member state where working orprocessing of the finished product has taken place provided that the aggregateACFTA content of the final product is not less than 40%; or(iv) Products which satisfy the products specific rules provided for in attachment B ofthe ASEAN China ROO shall be considered as goods to which sufficienttransformation has been carried out in a partybahwa menurut Pemohon Banding, dari overleaf Note attachment C

Berdasarkan Canada Border Service Agency, Custom Notice N484,Ottawa, 26 Nov2002 dan CBSA Statement Of Reason , Ottawa 9 Desember 2002The distinctive feature of waterproof footwear is that both the sole portion and the aportion of the upper, sufficient to give waterproof protection to the foot, areincorporated into a single component which may be made of rubber or plastic.Diterjemahkan oleh Penerjemah Resmi Dan TersumpahHarry F.

Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05 dibedakanberdasarkan bahan penyusun outer sole dan upper, Explanatory Noted Bab 64Umum (B)e Menurut pendapat pemohon banding (kami) penyataan diatas kurang tepatkarena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubber or ofplastic, the uppers of which are neither fixed to the sole norassembled by stitching, riveting, nailing, screwing, plugging orsimilar processes.Pos 64.02 Other footwear

memenuhisyarat kedua karena pembuatannya dengan cara injection moulding, karena untukmasuk sub pos 64.02 harus memenuhi syarat pembuatannya dengan cara dijahit,dikeling, dipaku, disekrup, ditusuk atau dengan cara semacam itu.Bahwa pada penjelasan sub pos 64.02 pada halaman XII 64021 ExplanatoryNotes, Fifth Edition , Volume 3, dinyatakan : The Heading covers, inter alia:a Ski boots consisting of several moulded parts hinged onrivets or similar devices;b Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base orplatform by riveting ;c Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled otherthan by stitching, are attached to the sole by stitching;d Sandals consiting of straps across the instep and counteror heelstrap attached to the sole by any process;e Thongtype sandals in which the thongs are attached tothe sole by plugs which lock into holes in the sole;f Nonwaterproof footwear produced in

belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby nveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

Putusan Nomor 313/B/PK/PJK/2016Bahwa berdasarkan Canada Border Service Agency, Custom Notice N484,Ottawa, Nov 26, 2002 dan Canada Border Service Agency,Statement Of Reason, Ottawa, December 9, 2002The distinctive feature of Waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give Waterproof protection to thefoot, are incorporated into a single component which may be made of rubberor plastic.;Diterjemahkan oleh Penerjemah Resmi dan Tersumpah:Harry F.

Canada Borders Service Agency, Statement Of Reason, Ottawa NovDec 9 2002Thedistinctive feature of waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give waterproof protection tothe foot, are incorporated into a single component which may be madeof rubber or plastic diterjemahkan ciri knas alas kaki tahan air adalahkedua bagian sol dan bagian atasnya mampu memberikan perlindungantahan air terhadap kaki, terbentuk dalam komponen tunggal yangterbuat dari

Putusan Nomor 313/B/PK/PJK/201611.12.13.14.pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, Inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orSimilar devices;(b) Clogs without quarter or counter, the uppers of which are producedin one piece usually attached to the base or platform by riveting

;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consisting of straps across the instep and counter or heelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);Bahwa dengan Explanatory Notes

Berdasarkan Canada Border Service Agency, Custom Notice N484, Ottawa,26 Nov 2002 dan CBSA Statement Of Reason , Ottawa 9 Desember 2002The distinctive feature of waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give waterproof protection to thefoot, are incorporated into a single component which may be made of rubberor plastic.Diterjemahkan oleh Penerjemah Resmi Dan Tersumpah :Harry F.

Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05 dibedakanberdasarkan bahanpenyusun outer sole dan upper , Explanatory Noted Bab 64 Umum (B),~Menurut pendapat pemohon banding ( kami ) penyataan diatas kurangtepat karena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubberor of plastic, the uppers of which are neither fixed to thesole nor assembled by stitching, riveting, nailing, screwing,plugging or similar processes;Pos 64.02 Other footwear

memenuhi syarat kedua karena pembuatannya dengan carainjection moulding, karena untuk masuk pos 64.02 harus memenuhisyarat pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup,ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : The Headingcovers, inter alia:(m) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(n) Clogs without quarter or counter, the uppers of which

are producedin one piece usually attached to the base or platform by riveting;(0) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(p) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(q) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(r) Nonwaterproof footwear produced

Persetujuan Perdagangan Barang Dalam Persetujuan KeranKerja Mengenai Kerjasama Ekonomi Menyeluruh Antara NegaraNegara Anggota AsosBangsaBangsa Asia Tenggara Dan Republic Rakyat China), yaitu pada Annex 3 "RulesOrigin For The The AseanChina Free Trade Area", dinyatakan:Rule 2: Origin CriteriaFor the purposes of this Agreement, products imported by a Party shall be deemed tcoriginating and eligible for preferential concessions if they conform to the orrequirements under any one of the following:Products which

Articles collected there which can no longer perform their original purpose norcapable of being restored or repaired and are fit only for disposal or recovery of pof raw materials, or for recycling purpose(4; andk.

belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to thesole by plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

Berdasarkan CANADA BORDER SERVICE AGENCY, Custom Notice N484,Ottawa, 26 Nov 2002 dan CBSA Statement Of Reason , Ottawa 9Desember 2002The distinctive feature of waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give waterproof protection tothe foot, are incorporated into a single component which may be made ofrubber or plastic.Diterjemahkan oleh Penerjemah Resmi Dan Tersumpah :Harry F.

Putusan Nomor 77/B/PK/PJK/2015bagian sol dan bagian atasnya mampu memberikan perlindungan kedapair terhadap kaki.3.Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05 dibedakanberdasarkan bahan penyusun outer sole dan upper , Explanatory Noted Bab64 Umum (B)>,~~Menurut pendapat pemohon banding ( kami ) penyataan diatas kurangtepat karena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubber orof plastic, the uppers of which are neither fixed to

syarat kedua karena pembuatannya dengan cara injectionmoulding, karena untuk masuk sub pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu;Bahwa pada penjelasan sub pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimiliar devices;(6) Clogs without quarter or counter, the uppers of which

are producedin one piece usually attached to the base or platform by riveting;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

orang lain atau perbuatan (atau tidak berbuat) bertentangan dengan kewajiban menurut undangundang atau bertentangan dengan apa yang menurut hukum tidak tertulis yang seharusnya dijalankan olehseorang dalam pergaulannya dengan sesama warga masyarakat dengan mengingat adanya alasanpembenar menurut hukum);Code Civil Perancis mengaturnya dalam titel IV Chapter II artikel 1382 sampai dengan artikel 1386 denganjudul Delicts and QuasiDelicts;Dalam artikel 1382 dikatakan bahwa :Any act whatever of man which

causes damage to another obliges him by whose fault it accorred to makereparation;Kemudian mengenai tanggung jawab terhadap kelalaian atau kurang hatihati diatur dalam artikel 1383sebagai berikut:Each one is liable for the damage which he causes not only by his own act but also by his negligence orimprudence;Selanjutnya artikel 1384 menentukan :He is liable not only for the damage which he caused by his own act, but also for that which is caused bythe act of persons for whom he is responsible, or

by things which he has in his keeping;Artikel 1382, 1383 dan 1384 Code Civil Perancis tersebut sama persis bunyinya dengan Pasal 1365, 1366dan 1367 KU H Perdata;Konsep perbuatan melawan hukum dalam sistem Common Law disebut the law of tort.

Tort is a civil wrong for which the remedy is a common law action for unliquidated damages and which isnot exclusivey the breach of contract or a breach of a trust or other merely equitable obligation;Sir P. Wienfield mengatakan bahwa :Tortious liability arises from the breach of duty primarily fixed by law, such duty is towards personsgenerally and its breach is redressible by an action for unliquidated damages;L.B.

Curzon memberikan definisi Tort sebagai berikut:The Law of Tort is concerned with the determination of disputes which arise where one person allegeswrong conduct against another.

Berdasarkan CANADA BORDER SERVICE AGENCY, Custom Notice N484,Ottawa, 26 Nov 2002 dan CBSA Statement Of Reason , Ottawa 9Desember 2002The distinctive feature of waterproof footwear is that both the sole portion andthe a portion of the upper, sufficient to give waterproof protection to the foot,are incorporated into a single component which may be made of rubber orplastic.Diterjemahkan oleh Penerjemah Resmi Dan Tersumpah : Harry F.

Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05dibedakan berdasarkan bahan penyusun outer sole dan upper ,Explanatory Noted Bab 64 Umum (B)+ Menurut pendapat pemohon banding ( kami ) penyataan diatas kurangtepat karena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubberor of plastic, the uppers of which are neither fixed to the solenor assembled by stitching, riveting, nailing, screwing,plugging or similar processes.Pos 64.02 Other footwear

syarat kedua karena pembuatannya dengan cara injectionmoulding, Karena untuk masuk sub pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu.Bahwa pada penjelasan sub pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(6) Clogs without quarter or counter, the uppers of which

are produced inone piece usually attached to the base or platform by riveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching, areattached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

dan Japan, disebutkan bahwa"Where :(a) an enterprise of a Contracting State participates directly or indirectly in themanagement, control or capital of an enterprise of the other ContractingState, or(b) the same persons participate directly or indirectly in the management,control or capital of an enterprise of a Contracting State and an enterprise ofthe other Contracting State, and in either case conditions are made orimposed between the two enterprises in their commercial or financialrelations which

differ from those which would be made between independententerprises, then any profits which would, but for those conditions, haveaccrued to one of the enterprises, but, by reason of those conditions, havenot so accrued, may be included in the profits of that enterprise and taxedaccordingly.

Jepang, mengatur bahwa:Article 9Where :(a) an enterprise of a Contracting State participates directly orindirectly in the management, control or capital of an enterprise ofthe other Contracting State, or(b) the same persons participate directly or indirectly in themanagement, control or capital of an enterprise of a ContractingState and an enterprise of the other Contracting State,and in either case conditions are made or imposed between the twoenterprises in their commercial or financial relations which

differ fromthose which would be made between independent enterprises, thenany profits which would, but for those conditions, have accrued to oneof the enterprises, but. by reason of those conditions, have not soaccrued, may be included in the profits of that enterprise and taxedaccordingly.2.6.

Putusan Nomor 780/B/PK/PJK/2013and in either case conditions are made imposed between the twoentreprises in their commercial or financial relations which differ fromthose which would be made between independent enterprises, thenany profits which would, but by reason of those conditions, haveaccrued to one of the enterprises but by reason of those conditions,have not so accrued, may be included in the profits of that enterpriseand taxed accordingly.Bahwa pada paragraf 6.8 Chapter VI OECD Transfer

or capital of an enterprise of aContracting State and an enterprise of the otherContracting State;And in either case conditions are made imposed between thetwo entreprises in their commercial or financial relationswhich differ from those which would be made betweenindependent enterprises, then any profits which would, butby reason of those conditions, have accrued to one of theenterprises but by reason of those conditions, have not soaccrued, may be included in the profits of that enterprise andtaxed

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

Canada Borders Service Agency, Statement Of Reason ,Ottawa Nov Dec 9 2002The distinctive feature of waterproof footwear is that both the Sole portionand the a portion of the Upper, sufficient to give waterproof protection to thefoot, are incorporated into a single component which may be made of rubberor plastic diterjemahkan ciri khas alas kaki tahan air adalah kedua bagian soldan bagian atasnya mampu memberikan perlindungan tahan air terhadapkaki, terbentuk dalam komponen tunggal yang terbuat dari

kelihatanmemenuhi syarat kedua karena pembuatannya dengan cara injectionmoulding, karena untuk masuk pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu.Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : The Headingcovers, inter alia:(1) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(2) Clogs without quarter or counter, the Uppers of which

are producedin one piece usually attached to the base or platform by riveting;(3) Slippers or mules without quarter or counter,the Uppers of which,being produced in one piece or assembled other than by stitching,are attached to the Sole by stitching;(4) Sandals consiting of straps across the instep and counter orheelstrap attached to the Sole by any process;(5) Thongtype sandals in which the thongs are attached to the Sole byplugs which lock into holes in the Sole;(6) Nonwaterproof footwear produced

pencetakan melalui perendamane perakitan melalui vulkanisasie penyatuan dan pemvulkanisasiane pengetasan berflekuensi tinggie perekatanBahwa berdasarkan Canada Border Service Agency, Custom Notice N484,Ottawa, Nov 26, 2002 dan Canada Border Service Agency,Statement Of Reason, Ottawa, December 9, 2002The distinctive feature of Waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give Waterproof protection to thefoot, are incorporated into a single component which

Putusan Nomor 73/B/PK/PJK/201 7The distinctive feature of waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give waterproof protection to thefoot, are incorporated into a single component which may be made of rubberor plastic diterjemahkan ciri knas alas kaki tahan air adalah kedua bagiansol dan bagian atasnya mampu memberikan perlindungan tahan airterhadap kaki, terbentuk dalam komponen tunggal yang terbuat dari karetatau plastik;Berdasarkan fakta, uraian

kelihatanmemenuhi syarat kedua karena pembuatannya dengan cara injectionmoulding, karena untuk masuk pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, Inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orSimilar devices;(b) Clogs without quarter or counter, the uppers of which

are producedin one piece usually attached to the base or platform by riveting;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(da) Sandals consisting of straps across the instep and counter or heelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;Halaman 28 dari 31 halaman.

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu.Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to thesole by plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

hukumPengadilan Agama Jakarta Utara;Bahwa, awal kehidupan perkawinanPENGGUGAT dan TERGUGAT hidupharmonis, namun ketentraman rumahtangga mulai goyah, yang disebabkankarenaterjadi = perselisihan danpertengkaran serta TERGUGATmelakukanPENGGUGAT;Penganiayaan kepadaBahwa, adapun pertengkaran = antaraChild";Whereas, after the marriage PLAINTIFFand the DEFENDANT have been livingin Apartment Block 102 Tower Road #03262, Singapore;Based on the provisions of Article 132paragraph (1) The Compilation os IslamLaw which

Hence, it is sufficient and in accordancewith the laws for the PLAINTIFF tosubmit the Divorce Lawsuit to the Courtlocated in the PLAINTIFF's residence,which is the jurisdiction of the NorthJakarta Religious Court;Whereas, in the beginning of their marriage,both PLAINTIFF and DEFENDANT?

jutarupiah) setiap bulannya sampai anaktersebut telah mencapai usia dewasa dandapat menentukan sendiri kehendaknya;Menetapkan biaya perkara menurut hukum.it can be declared the application fordivorce is granted;Whereas, the PLAINTIFF is able to pay allcosts arising from this case;Then based on the reasons / argumentsmentioned above, the PLAINTIFF requests/ appeals to the Head of the North JakartaReligious Court c / g, the Honorable Panelof Judges who will look and examine thecase, then grant the verdict which

Proyek PISP (Participatory Irrigation Sector Project);Dalam kontrak disebutkan halhal sebagai berikut:This Contract (hereinafter called the "Contract") is made on the 6thday of the month of December, 2006 between, on the hand,Directorate General of Water Resources (DGWR), Ministry of PublicWorks, Republic of Indonesia (hereinafter called the "Client") and,on the other hand a Joint Venture consisting of the following entities,each of which will be jointly and severally liable to the Client for allthe

DDC Consultants (hereinaftercollectivelly called the "Consultant).Sedangkan dalam General Condition of Contract juga dijelaskanbahwa "Joint Venture" means a Consultant which compries two ormore Peartners each of wich will be jointly and severally liable to theClient for all the Consultant's obligations under the Contract.a) Dasar Hukum UndangUndang Nomor 18 Tahun 2000 tentang PerubahanKedua Atas UndangUndang Nomor 8 Tahun 1983 tentangPajak Pertambahan Nilai Barang Dan Jasa Dan PajakPenjualan Atas

Proyek PISP (Participatory Irrigation Sector Project);Dalam kontrak disebutkan halhal sebagai berikut:This Contract (hereinafter called the Contract) is made on the 6thday of the month of December, 2006 between, on the hand,Directorate General of Water Resources (DGWR), Ministry of PublicWorks, Republic of Indonesia (hereinafter called the Client) and,on the other hand a Joint Venture consisting of the following entities,each of which will be jointly and severally liable to the Client for allthe

DDC Consultants (hereinaftercollectivelly called the Consultant).Sedangkan dalam General Condition of Contract juga dijelaskanbahwa Joint Venture means a Consultant which compries two ormore Peartners each of wich will be jointly and severally liable to theClient for all the Consultants obligations under the Contract.a) Dasar Hukum; UndangUndang Nomor 18 Tahun 2000 tentang PerubahanKedua Atas UndangUndang Nomor 8 Tahun 1983 tentangPajak Pertambahan Nilai Barang Dan Jasa Dan PajakPenjualan Atas Barang