Ditemukan 2114 data

Urut Berdasarkan
 
Putus : 19-09-2018 — Upload : 22-11-2018
Putusan MAHKAMAH AGUNG Nomor 2024/B/PK/Pjk/2018
Tanggal 19 September 2018 — PT ALASINDO MAKMUR VS DIREKTUR JENDERAL BEA DAN CUKAI
20348 Berkekuatan Hukum Tetap
  • belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base or platformby nveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced
Putus : 28-06-2018 — Upload : 27-08-2018
Putusan MAHKAMAH AGUNG Nomor 1341 B/PK/Pjk/2018
Tanggal 28 Juni 2018 — PT ALASINDO MAKMUR VS DIREKTUR JENDERAL BEA DAN CUKAI
16434 Berkekuatan Hukum Tetap
  • Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : TheHeading covers, inter alia:(a)(b)(c)()(e)(1)Ski boots consisting of several moulded parts hinged on rivetsor similar devices;Clogs without quarter or counter, the uppers of which areproduced in one piece usually attached to the base or platformby riveting;Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching,
    are attached to the sole by stitching;Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;Thongtype sandals in which the thongs are attached to thesole by plugs which lock into holes in the sole;Nonwaterproof footwear produced in one piece (for example,bathing slippers);12.
Register : 15-07-2013 — Putus : 17-03-2014 — Upload : 10-11-2014
Putusan PENGADILAN PAJAK Nomor Put-51339/PP/M.XVIIB/19/2014
Tanggal 17 Maret 2014 — Pemohon Banding dan Terbanding
10619
  • Barang Dalam Persetujuan KerangkaKerja Mengenai Kerjasama Ekonomi Menyeluruh Antara NegaraNegara AnggotaAsosiasi BangsaBangsa Asia Tenggara Dan Republic Rakyat China), yaitu pada Annex 3"Rules Of Origin For The The AseanChina Free Trade Area", dinyatakan:Rule 2: Origin CriteriaFor the purposes of this Agreement, products imported by a Party shall be deemed to beoriginating and eligible for preferential concessions if they conform to the originrequirements under any one of the following:Products which
    Articles collected there which can no longer perform their original purpose nor arecapable of being restored or repaired and are fit only for disposal or recovery ofparts of raw materials, or for recycling purpose(4; andJ.
Register : 02-10-2013 — Putus : 26-11-2014 — Upload : 22-12-2015
Putusan PENGADILAN PAJAK Nomor Put-57688/PP/M.XVIIA/19/2014
Tanggal 26 Nopember 2014 — Pemohon Banding dan Terbanding
27336
  • PerdaganganBarang Dalam Persetujuan Kerangka Kerja Mengenai Kerjasama EkonomiMenyeluruh Antara NegaraNegara Anggota Asosiasi BangsaBangsa Asia TenggaraDan Republic Rakyat China), yaitu pada Annex 3 "Rules Of Origin For The TheAseanChina Free Trade Area", dinyatakan:Rule 2: Origin CriteriaFor the purposes of this Agreement, products imported by a Party shall be deemed tobe originating and eligible for preferential concessions if they conform to the originrequirements under any one of the following:Products which
    Articles collected there which can no longer perform their original purpose nor are capable of beingrestored or repaired and are fit only for disposal or recovery of parts of raw materials, or for recyclingpurpose(4; andk.
Register : 29-11-2013 — Putus : 08-10-2014 — Upload : 03-11-2015
Putusan PENGADILAN PAJAK Nomor Put-55966/PP/M.XVIIA/19/2014
Tanggal 8 Oktober 2014 — Pemohon Banding dan Terbanding
13623
  • Persetujuan Perdagangan Barang Dalam Persetujuan KeranKerja Mengenai Kerjasama Ekonomi Menyeluruh Antara NegaraNegara Anggota AsosBangsaBangsa Asia Tenggara Dan Republic Rakyat China), yaitu pada Annex 3 "RulesOrigin For The The AseanChina Free Trade Area", dinyatakan:Rule 2: Origin CriteriaFor the purposes of this Agreement, products imported by a Party shall be deemed tcoriginating and eligible for preferential concessions if they conform to the orrequirements under any one of the following:Products which
    Articles collected there which can no longer perform their original purpose norcapable of being restored or repaired and are fit only for disposal or recovery of pof raw materials, or for recycling purpose(4; andk.
Register : 14-09-2018 — Putus : 24-10-2018 — Upload : 21-11-2018
Putusan MAHKAMAH AGUNG Nomor 2785 B/PK/PJK/2018
Tanggal 24 Oktober 2018 — PT. ALASINDO MAKMUR VS DIREKTUR JENDERAN BEA DAN CUKAI;
287 Berkekuatan Hukum Tetap
  • belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced
Register : 08-02-2019 — Putus : 14-03-2019 — Upload : 01-11-2019
Putusan MAHKAMAH AGUNG Nomor 714 B/PK/PJK/2019
Tanggal 14 Maret 2019 — PT. ALASINDO MAKMUR vs DIREKTUR JENDERAL BEA DAN CUKAI;
6916 Berkekuatan Hukum Tetap
  • belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base or platformby nveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consisting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced
Putus : 11-03-2019 — Upload : 28-05-2019
Putusan MAHKAMAH AGUNG Nomor 605/B/PK/Pjk/2019
Tanggal 11 Maret 2019 — PT ALASINDO MAKMUR VS DIREKTUR JENDERAL BEA DAN CUKAI
17141 Berkekuatan Hukum Tetap
  • memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced
Register : 23-10-2013 — Putus : 05-11-2014 — Upload : 31-03-2016
Putusan PENGADILAN PAJAK Nomor Put-56871/PP/M.XVIIA/19/2014
Tanggal 5 Nopember 2014 — Pemohon Banding dan Terbanding
17245
  • Persetujuan Perdagangan Barang Dalam Persetujuan KeranKerja Mengenai Kerjasama Ekonomi Menyeluruh Antara NegaraNegara Anggota AsosBangsaBangsa Asia Tenggara Dan Republic Rakyat China), yaitu pada Annex 3 "RulesOrigin For The The AseanChina Free Trade Area", dinyatakan:Rule 2: Origin CriteriaFor the purposes of this Agreement, products imported by a Party shall be deemed tcoriginating and eligible for preferential concessions if they conform to the orrequirements under any one of the following:Products which
    Articles collected there which can no longer perform their original purpose norcapable of being restored or repaired and are fit only for disposal or recovery of pof raw materials, or for recycling purpose(4; andk.
Putus : 15-08-2013 — Upload : 20-06-2014
Putusan MAHKAMAH AGUNG Nomor 212 K/Pdt.Sus-Arbt/2013
Tanggal 15 Agustus 2013 — PT. GLOBAL MEDIACOM TBK. (“MCOM”) yang diwakili oleh Direksi: 1. M. BUDI RUSTANTO, 2. HANDHIANTO SURYO KENTJONO VS KT CORPORATION
17141481 Berkekuatan Hukum Tetap
  • ;The Tribunal hereby authorises and grants power of attorney toeach of the Parties hereto and any Indonesian counsel appointedby either (any) of them, to apply for and undertake registration ofthis Award with the District Court of Central Jakarta, or anyother court in which such registration is required to be made, allin accordance with the requirement of Article 67 of Indonesia'sArbitration Law, Law No 30 of 1999.;All other claims are rejected.
    Hal ini sebagaimana dinyatakan dalam Shareholder Agreement tanggal9 Juni 2006 (Bukti P2), sebagai berikut:"The company (baca : Mobile 8) intends to conduct Initial Public Offering (asdefined below) which will be conducted prior to Bimantara Limited Offering (as definedbelow), that will affect the changes of the status of the Company to become a publiccompany";Terjemahan adalah:"Perseroan (baca : Mobile 8) bermaksud untuk melakukan Penawaran UmumPerdana (sebagaimana yang didefinisikan di bawah) dimana
    Recognition and enforcement of the award may be refused, at the request ofthe party against whom it revoked, only if the party furnishes to the competentauthority where the recognition and enforcement is sought, proof that:(e) the award has not yet become binding on the parties, or has been set asideor suspended by competent authority of the country in which, or under thelaw, that award was made";Terjemahannya:"1.
    The award has not yet become binding on the parties, or has been set asideor suspended by a competent authority of the country in which, or underthe law of which, that award was made";Adapun terjemahan tersumpahnya menyatakan sebagai berikut (Bukti P4.b):"Pengakuan dan pelaksanaan keputusan dapat ditolak, atas permohonan pihakterhadap mana putusan itu diterapkan, hanya jika pihak itu menyediakanotoritas yang berwenang di mana pengakuan dan pelaksanaan itu diupayakan,membuktikan bahwa:(e).
Putus : 13-09-2017 — Upload : 28-12-2017
Putusan MAHKAMAH AGUNG Nomor 1625/B/PK/PJK/2017
Tanggal 13 September 2017 — DIREKTUR JENDERAL PAJAK VS PT. KARYA SUMIDEN INDONESIA,
9059 Berkekuatan Hukum Tetap
  • dan Japan, disebutkan bahwa"Where :(a) an enterprise of a Contracting State participates directly or indirectly in themanagement, control or capital of an enterprise of the other ContractingState, or(b) the same persons participate directly or indirectly in the management,control or capital of an enterprise of a Contracting State and an enterprise ofthe other Contracting State, and in either case conditions are made orimposed between the two enterprises in their commercial or financialrelations which
    differ from those which would be made between independententerprises, then any profits which would, but for those conditions, haveaccrued to one of the enterprises, but, by reason of those conditions, havenot so accrued, may be included in the profits of that enterprise and taxedaccordingly.
    Jepang, mengatur bahwa:Article 9Where :(a) an enterprise of a Contracting State participates directly orindirectly in the management, control or capital of an enterprise ofthe other Contracting State, or(b) the same persons participate directly or indirectly in themanagement, control or capital of an enterprise of a ContractingState and an enterprise of the other Contracting State,and in either case conditions are made or imposed between the twoenterprises in their commercial or financial relations which
    differ fromthose which would be made between independent enterprises, thenany profits which would, but for those conditions, have accrued to oneof the enterprises, but. by reason of those conditions, have not soaccrued, may be included in the profits of that enterprise and taxedaccordingly.2.6.
Putus : 10-03-2015 — Upload : 30-11-2015
Putusan MAHKAMAH AGUNG Nomor 1068/C/PK/PJK/2014
Tanggal 10 Maret 2015 — PT TRI TUNGGAL PRATYAKSA vs. DIREKTUR JENDERAL PAJAK
3622 Berkekuatan Hukum Tetap
  • Proyek PISP (Participatory Irrigation Sector Project)Dalam kontrak disebutkan halhal sebagai berikut :This Contract (hereinafter called the "Contract") is made on the 6thday of the month of December, 2006 between, on the hand,Directorate General of Water Resources (DGWAR), Ministry of PublicWorks, Republic of Indonesia (hereinafter called the "Client") and, onthe other hand a Joint Venture consisting of the following entities,each of which will be jointly and severally liable to the Client for all
    Putusan Nomor 1068/C/ PK/PJK/2014Sedangkan dalam General Condition of Contract juga dijelaskanbahwa "Joint Venture" means a Consultant which compries two ormore Peartners each of wich will be jointly and severally liable to theClient for all the Consultant's obligations under the Contract.a) Dasar HukumUndangUndang Nomor 18 Tahun 2000 tentang Perubahan KeduaAtas UndangUndang Nomor 8 Tahun 1983 tentang PajakPertambahan Nilai Barang Dan Jasa Dan Pajak Penjualan AtasBarang MewahPasal 16B ayat (1) :
    Proyek PISP (Participatory Irrigation Sector Project)Dalam kontrak disebutkan halhal sebagai berikut :This Contract (hereinafter called the Contract) is made on the 6thday of the month of December, 2006 between, on the hand,Directorate General of Water Resources (DGWR), Ministry of PublicWorks, Republic of Indonesia (hereinafter called the Client) and, onthe other hand a Joint Venture consisting of the following entities, eachof which will be jointly and severally liable to the Client for all theConsultants
    DDC Consultants (hereinafter collectivellycalled the Consultant).Sedangkan dalam General Condition of Contract juga dijelaskanbahwa Joint Venture means a Consultant which compries two ormore Peartners each of wich will be jointly and severally liable to theClient for all the Consultants obligations under the Contract.a) Dasar HukumHalaman 10 dari 16 halaman.
Putus : 06-06-2016 — Upload : 10-11-2016
Putusan MAHKAMAH AGUNG Nomor 313/B/PK/PJK/2016
Tanggal 6 Juni 2016 — CV PUJIMA GOARNA vs DIREKTUR JENDERAL BEA DAN CUKAI
2517 Berkekuatan Hukum Tetap
  • Putusan Nomor 313/B/PK/PJK/2016Bahwa berdasarkan Canada Border Service Agency, Custom Notice N484,Ottawa, Nov 26, 2002 dan Canada Border Service Agency,Statement Of Reason, Ottawa, December 9, 2002The distinctive feature of Waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give Waterproof protection to thefoot, are incorporated into a single component which may be made of rubberor plastic.;Diterjemahkan oleh Penerjemah Resmi dan Tersumpah:Harry F.
    Canada Borders Service Agency, Statement Of Reason, Ottawa NovDec 9 2002Thedistinctive feature of waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give waterproof protection tothe foot, are incorporated into a single component which may be madeof rubber or plastic diterjemahkan ciri knas alas kaki tahan air adalahkedua bagian sol dan bagian atasnya mampu memberikan perlindungantahan air terhadap kaki, terbentuk dalam komponen tunggal yangterbuat dari
    Putusan Nomor 313/B/PK/PJK/201611.12.13.14.pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, Inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orSimilar devices;(b) Clogs without quarter or counter, the uppers of which are producedin one piece usually attached to the base or platform by riveting
    ;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consisting of straps across the instep and counter or heelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);Bahwa dengan Explanatory Notes
Putus : 13-05-2019 — Upload : 31-07-2019
Putusan MAHKAMAH AGUNG Nomor 1180/B/PK/Pjk/2019
Tanggal 13 Mei 2019 — PT ALASINDO MAKMUR vs. DIREKTUR JENDERAL BEA DAN CUKAI
3718 Berkekuatan Hukum Tetap
  • memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced
Register : 09-06-2011 — Putus : 27-02-2013 — Upload : 14-07-2013
Putusan PENGADILAN PAJAK Nomor Put-43631/PP/M.XVII/19/2013
Tanggal 27 Februari 2013 — Pemohon Banding dan Terbanding
12133
  • Banding, lebih lanjut, dalam Overleaf Note Attachment C dariACFT A point 3 dinyatakan sbb:ORIGIN CRITERIA: For exports to the above mentioned countries to be eligible forpreferential treatment, the requirement is that either: (i) The products wholly obtained in theexporting member state as defined in Rule 3 of theASEAN China ROO;(ii) Subject to subparagraph (i) above, for the purpose of implementing theprovisions of Rule 2(b) of the ASEAN China ROO, products worked on andprocessed as a result of which
    the total value of the materials, parts or produceoriginating from non ACFTA member states or of undetermined origin used doesnot exceed 60% of the FOB Value of the product produced or obtained and thefinal process of the manufacture is performed within territory of the exportingmember state;(iii) Products which comply with origin requirements provided for Rule 2 of theASEAN China ROO and which are used in a member state as inputs for finishedproduct eligible for preferential treatment in another
    member state/states shall beconsidered as a product originating in the member state where working orprocessing of the finished product has taken place provided that the aggregateACFTA content of the final product is not less than 40%; or(iv) Products which satisfy the products specific rules provided for in attachment B ofthe ASEAN China ROO shall be considered as goods to which sufficienttransformation has been carried out in a partybahwa menurut Pemohon Banding, dari overleaf Note attachment C
Register : 03-11-2014 — Putus : 11-02-2015 — Upload : 14-08-2015
Putusan MAHKAMAH AGUNG Nomor 1011 B/PK/PJK/2014
Tanggal 11 Februari 2015 — DIREKTUR JENDERAL PAJAK VS CV. PUJIMA GOARNA
3719 Berkekuatan Hukum Tetap
  • Berdasarkan Canada Border Service Agency, Custom Notice N484,Ottawa, 26 Nov2002 dan CBSA Statement Of Reason , Ottawa 9 Desember 2002The distinctive feature of waterproof footwear is that both the sole portion and the aportion of the upper, sufficient to give waterproof protection to the foot, areincorporated into a single component which may be made of rubber or plastic.Diterjemahkan oleh Penerjemah Resmi Dan TersumpahHarry F.
    Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05 dibedakanberdasarkan bahan penyusun outer sole dan upper, Explanatory Noted Bab 64Umum (B)e Menurut pendapat pemohon banding (kami) penyataan diatas kurang tepatkarena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubber or ofplastic, the uppers of which are neither fixed to the sole norassembled by stitching, riveting, nailing, screwing, plugging orsimilar processes.Pos 64.02 Other footwear
    memenuhisyarat kedua karena pembuatannya dengan cara injection moulding, karena untukmasuk sub pos 64.02 harus memenuhi syarat pembuatannya dengan cara dijahit,dikeling, dipaku, disekrup, ditusuk atau dengan cara semacam itu.Bahwa pada penjelasan sub pos 64.02 pada halaman XII 64021 ExplanatoryNotes, Fifth Edition , Volume 3, dinyatakan : The Heading covers, inter alia:a Ski boots consisting of several moulded parts hinged onrivets or similar devices;b Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base orplatform by riveting ;c Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled otherthan by stitching, are attached to the sole by stitching;d Sandals consiting of straps across the instep and counteror heelstrap attached to the sole by any process;e Thongtype sandals in which the thongs are attached tothe sole by plugs which lock into holes in the sole;f Nonwaterproof footwear produced in
Putus : 04-12-2017 — Upload : 28-12-2017
Putusan MAHKAMAH AGUNG Nomor 2175/B/PK/PJK/2017
Tanggal 4 Desember 2017 — CV PUJIMA GOARNA vs DIREKTUR JENDERAL BEA DAN CUKAI
3712 Berkekuatan Hukum Tetap
  • Berdasarkan Canada Border Service Agency, Custom Notice N484, Ottawa,26 Nov 2002 dan CBSA Statement Of Reason , Ottawa 9 Desember 2002The distinctive feature of waterproof footwear is that both the sole portionand the a portion of the upper, sufficient to give waterproof protection to thefoot, are incorporated into a single component which may be made of rubberor plastic.Diterjemahkan oleh Penerjemah Resmi Dan Tersumpah :Harry F.
    Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05 dibedakanberdasarkan bahanpenyusun outer sole dan upper , Explanatory Noted Bab 64 Umum (B),~Menurut pendapat pemohon banding ( kami ) penyataan diatas kurangtepat karena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubberor of plastic, the uppers of which are neither fixed to thesole nor assembled by stitching, riveting, nailing, screwing,plugging or similar processes;Pos 64.02 Other footwear
    memenuhi syarat kedua karena pembuatannya dengan carainjection moulding, karena untuk masuk pos 64.02 harus memenuhisyarat pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup,ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : The Headingcovers, inter alia:(m) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(n) Clogs without quarter or counter, the uppers of which
    are producedin one piece usually attached to the base or platform by riveting;(0) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(p) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(q) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(r) Nonwaterproof footwear produced
Putus : 08-12-2015 — Upload : 10-03-2016
Putusan MAHKAMAH AGUNG Nomor 741/B/PK/PJK/2015
Tanggal 8 Desember 2015 — CV. PUJIMA GOARNA vs DIREKTUR JENDERAL BEA DAN CUKAI
3853 Berkekuatan Hukum Tetap
  • Berdasarkan CANADA BORDER SERVICE AGENCY, Custom Notice N484,Ottawa, 26 Nov 2002 dan CBSA Statement Of Reason , Ottawa 9Desember 2002The distinctive feature of waterproof footwear is that both the sole portion andthe a portion of the upper, sufficient to give waterproof protection to the foot,are incorporated into a single component which may be made of rubber orplastic.Diterjemahkan oleh Penerjemah Resmi Dan Tersumpah : Harry F.
    Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05dibedakan berdasarkan bahan penyusun outer sole dan upper ,Explanatory Noted Bab 64 Umum (B)+ Menurut pendapat pemohon banding ( kami ) penyataan diatas kurangtepat karena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubberor of plastic, the uppers of which are neither fixed to the solenor assembled by stitching, riveting, nailing, screwing,plugging or similar processes.Pos 64.02 Other footwear
    syarat kedua karena pembuatannya dengan cara injectionmoulding, Karena untuk masuk sub pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu.Bahwa pada penjelasan sub pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(6) Clogs without quarter or counter, the uppers of which
    are produced inone piece usually attached to the base or platform by riveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching, areattached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced
Putus : 11-07-2019 — Upload : 31-10-2019
Putusan MAHKAMAH AGUNG Nomor 2040/B/PK/Pjk/2019
Tanggal 11 Juli 2019 — PT ALASINDO MAKMUR vs. DIREKTUR JENDERAL BEA DAN CUKAI
3515 Berkekuatan Hukum Tetap
  • belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to thesole by plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced
Register : 14-09-2018 — Putus : 24-10-2018 — Upload : 18-12-2018
Putusan MAHKAMAH AGUNG Nomor 2787 B/PK/PJK/2018
Tanggal 24 Oktober 2018 — PT. ALASINDO MAKMUR vs DIREKTUR JENDERAN BEA DAN CUKAI;
319 Berkekuatan Hukum Tetap
  • memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which
    areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced