This message is intendedonly for the use of the individual or entity to which it is addressed and may contain information which isprivileged, confidential or subject to copyright.

The original KUD (which did not support One Asia) was in March 2015legalized by the Regional Government following its tanuary 2015 Annual Meeting. The newKUD, supported by One Asia for a period of twelve months, has no legal standing under CoOperative law. Finding itself with no legal standing, this new KUO supported by One Asia filed alaw sult ageinat the old and legal KUO on May 7, 2015.

ThisMOU announced on May 11, 2015 has triggered a Default Notice (see letter to One Asia,One Asla Resources owns 90% of PT Pani Resources Indonesle which has the right to process all ore viaon oxdusive offtake from the Pani UP which is owned by the KUD.

The company says it has a total resource of 2.6 million ounces, A feasibilityStudy is being carried out and One Asis is also awaiting permits for facility constructionThe second project is al Gunung Pani, Gorontalo, which has resources totalling 2.4 million ouncesto date. This project is carried out by a joint venture subsidiary with KUO Dharma Tani Marisa. Afeasibility study is being carried oul and the company is also awaiting operational permits.

We are extremely plaased in establishing a partnership with Provident and they bringto One Asia s team with extensive Indonesian exporience and networks which will be inveluable toOne Asia as the company grows.Lion Selection Group and Asian Lion own a combined equity interest of 38% of One AsiaResources, an Australian unlisted public companyTags Q OneAsieResouces feasibility stidy ) operetionalpenmits % Lion Selection Groupof? VU2015 8:4 AMHalaman 19 dari 28 hal.

,dated 11 December 2017, which legallybinding (inkracht van gewijsde): 2.

Jalan Raya Pemogan Gang NusaIndah Blok B No. 20, DenpasarSelatan, Denpasar Bali, terdaftar atasnama Pihak II , selanjutnya disebutsebagai Rumah Kost No. 20;Dimana masing masing harta dikuasai dandimanfaatkan oleh Pihak II; Identification Number (NIB)22.09.03.10.06952, in the area of 47m2 (forty seven square meters),located at Jalan Raya PemoganGang Nusa Indah Blok B No. 20,Denpasar Selatan, Denpasar Bali,registered in the name of the 2"Party, hereinafter referred to as theBoarding House No. 20,Which

rupiah) tersebut diatas, akan dibayarkan paling lambat 6 (enam)bulansejaktanggal penandatangananperjanjian ini atautepatnya paling lambattanggal 13 Mei 2019.Pihak IJ sepakat untuk menyerahkanOriginal/Asli SHM No. 9924/Desa Pemogan,Surat Ukur Nomor 05078/Pemogan/2012 The 2" Party agreed to provide and the 1*Party agreed to receive money in the sum ofRp. 235,000,000, (two hundred thirty fivemillion rupiah) as compensation for thelease revenues of the Dwelling House No.10 and Boarding House No. 20 which

Party agree to guarantee andpromise to assist the 1 Party in the saleandpurchase process and/or otherrightstransfer process to the 1* Party and/or athird party appointed by the 1 Party,including and not limited to the conversionprocess for the land stipulated in the Articleof this1(a) in conjunction with Article 3agreement to the rights of land which canbe owned by the 1 Party as a foreigner.

(one million rupiah) permonth which shall be paid in the beginningof each month during 2" Party stays at theBoarding House No. 20.

staged in Schedul 5 in respect of all sales and supply of productsServices pursuant to orders procured solely by the representative from customers inTerritory and accepted by Baker during the term of agreementRefrences in this Clauses 6.1 are limited to customer to whom the representative isappointed under this agreement to promote and market the sale of products andthe supply of services6.2 No Later than 45 days after termination of this agreement Baker Shall pay therepresentative any commission which

become due to it under this agreementprior to termination, in addition, Baker shall following termination pay to theRepresentative commission, within 30 days of such becoming due as provided inClause 6.4, in respect of sales concluded by Baker after termination in respect oforders procured and referred to Baker by the Representative prior to termination ,provided that :(a) Commision will only be due to the Representative on sales of products andorder for Services referred to above in respect of which

Baker agrees to pay Representative the total sum of Four Million UNITEDSTATES DOLARS AND NO/100 ($4,000000.00) which will be paid toRepresentative as referenced in Article 2.2 below. This payment is a net amount ofall funds due pursuant to this Termination Agreement.

(b) The 10% balance of settlement funds (US $ 400,000,00.) wil funded byBaker within 7 (seven) business days following the mutual execution of allappropriate share transfer documentation and resignations by the shareholders anddirector of PT Eastman Christensen Indonesia (PT ECI) , Mr Rayan Wijaya, MrToto Utomo, and Mr Herman Ganda which actions will implement the newshareholding structure in PT ECI. ....bahwa berdasarkan Termination Agreement (of Sales Representative Agreement)tersebut disepakati

Putusan Nomor 1567/B/PK/Pjk/201811.12.13.14.Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Filth Edition , Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(6) Clogs without quarter or counter, the uppers of which areproduced In one piece usually attached to the base or platformby nveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece

or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);Bahwa dengan Explanatory Notes, untuk pos 64.02 tersebut di atas,maka sandal jepit dan sandal yang diimpor Pemohon Bandingsekarang

belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby nveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

Putusan Nomor 2788/B/PK/Pjk/201811.12.13.14.Bahwa pada penjelasan pos 64.02 pada halaman XIIl64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which are producedin one piece usually attached to the base or platform by niveting;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece

or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);Bahwa dengan Explanatory Notes, untuk pos 64.02 tersebut di atas,maka sandal jepit dan sandal yang diimpor Pemohon Banding (sekarangPemohon

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platform bynveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleHalaman 8 dari 13 halaman.

Putusan Nomor 939/B/PK/Pjk/2019by plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);12.

However, such royalties may also be taxed in theContracting State in which they arise, and according to thelaws of that Contracting State, but if the recipient is thebeneficial owner of the royalties the tax so charged shall notexceed 10 percent of the gross amount of the royalties.3.

The provisions of paragraphs 1 and 2 shall not apply if thebeneficial owner of the royalties, being a resident of aContracting State, carries on business in the otherContracting State in which the royalties arise, through apermanent establishment situated therein, or perForms inthat other Contracting State independent personal servicesfrom a fixed base situated therein, and the right or propertyin respect of which the royalties are paid is effectivelyconnected with such permanent establishment or

Where, however, the person paying theroyalties, whether he is a resident of a Contracting State ornot, has in a Contracting State a permanent establishmentor a fixed base in connection with which the liability to paythe royalties was incurred, and such royalties are borne bysuch permanent establishment or fixed base, then suchroyalties shall be deemed to arise in the Contracting Statein which the permanent establishment or fixed base issituated.Where, by reason of a special relationship between thepayer

and the beneficial owner or between both of them andsome other person, the amount of the royalties, havingregard to the use, right or inFormation for which they arepaid, exceeds the amount which would have been agreedupon by the payer and the beneficial owner in the absenceof such relationship, the provisions of this Article shall applyonly to the lastmentioned amount.

they are jointly andseverally liable;To C6 RM 210,884,780 by R3 to the intent that its liability will be reducedby any payment made under 1;To C7 US$ 5,773,134 by R1, R2, and R3 for which they are jointly andseverally liable;To C7 US$ 15,659,174 by R3 to the intent that its liability will be reducedby any payment made under 3;To 08 US$ 59,327,055 by R1, R2, and R3 for which they are jointly andseverally liable;To C8 US$ 151,281,770 by R3 to the intent that its liability will bereduced by any payment

RI and R2 are liable for 49% ofthis amount which is US$77042744 US$7, 149,848.Following our conclusions in part three the tribunal awards and orders thatrestitution shoud be made and paid as follows:To C8 US$591327055 US$59,459,258 by RI, R2 and R3 for which they areJointly and severally liable;Terjemahan resmi dalam Bahasa Indonesia:"Saluran Perubahhaluan:Nilai total (tidak termasuk pajak) yang dituntut atas 21 saluran perubahhaluan yang diperoleh dari para pembeli lisensi pihak ketiga adalahUS$22,741,577

Nomor 26 PK/Pat.SusArbt/2016stake in the reference which has (until now) been very hard fought at everystage. The issues were complex and the documents voluminous. TheTribunal see no reason to reduce any award for costs simply on the basisthat the amounts claimed are excessive;19.In principle, the Claimants should have their costs as the obviouslysuccessful party.

To C6:RM35,974,386 by R1, R2 and R3 for which they are jointly andseverally liable;ii. Further, to C6: RM73,417, 116 by R3 to the intent that its liability will bereduced by any payment under (1);iii. To C7: US$1,397,493 by R1, R2 and R3 for which they are jointly andseverally liable;iv. Further, to C7: US$4,123,497 by R3 to the intent that its liability would bereduced by any payment under (iii);v. To C8 US$14,531,934 by R1, R2 and R32 for which they are jointly andseverally liable;vi.

For the reasons set out above, the Tribunal apportions the total costs of thearbitration as between the Claimants and the Respondents as follows:Claimants: NilRespondents: 100%Any enforcement of this part of the Award against the Respondents shouldtake account of deposits which they have paid to SIAC of S$617,217.48 andthe sum of S$150,708 paid directly to the Claimants following the hearing inLondon in September 2009;Halaman 12 dari 41 hal. Put. Nomor 26 PK/Padt.SusArbt/20163.

kelihatanmemenuhi syarat kedua karena pembuatannya dengan cara injectionmoulding, karena untuk masuk pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which

are producedin one piece usually attached to the base or platform by riveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

(C) The term outer sole as used in headings 64.01 to 64.05 means that part of the(other than an attached heel) which, when in use, is in contact with the pra. Theeconstituent material of the outer sole for purposes of classification shall be taken to be thematerial having the greatest surface area in contact with the ground.

In determining theconstituent material of the outer sole, no account should be taken of attached accessories orreinforcements which partly cover the sole (see Note 4 (b) to this Chapter).

In such cases, the u per shall be considered to be thatportion of the shoe which covers the sides and top of the foot.

The size of the uppers variesvery much between different types of footwear, fran those covering the foot and the wholeleg, including the thigh (for example, fishermens boots), to those which consist simply ofstraps or thongs (for example, sandals).If the upper consists of two or more materials, classification is determined by theconstituent material which has the preatect external surface area, no account being taken ofaccessories or reinforcements such as ankle patches, protective or ornamenta strips

Bahwa BTKI 2012 alas kaki dengan outer sole dan upper terbuatdari bahan karet atau plastik, diklasifikasikan pada Pos Tarif 64.01dan 64.02 dengan uraian:64.01 Waterproof Footwear with outer soles and uppers ofrubber or of plastics, the uppers of which are neither fixedto the sole nor assembled by stitching, riveting, nailing,screwing, plugging or similar processes.64.02 Other footwear with outer soles and uppers of rubber orplastics.Halaman 18 dari 28 halaman.

Putusan Nomor 91 7/B/PK/Pjk/201911.12.13.14.Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which are producedin one piece usually attached to the base or platform by niveting;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece

or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consisting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);Bahwa dengan Explanatory Notes, untuk pos 64.02 tersebut di atas,maka sandal jepit dan sandal yang diimpor Pemohon Banding (sekarangPemohon

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

(b) Clogs without quarter or counter, the uppers of which areproduced in one piece usually attached to the base or platform byriveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock

Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which are producedin one piece usually attached to the base or platform by niveting;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece or assembled other than by stitching,are attached

to the sole by stitching;(d) Sandals consisting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);1.

not later than31 December 1996 as set forth in Article 1, Definitions, page 31, paragraph2 of the Syndicated Credit Facility Agreement No. 159 (see Exhibit P1)which reads as follows:Scheduled Completion Date: means the date that Project Completion isrequired to occur pursuant to this Agreement, which date shall be not later thanthe 31st (thirty first) day of December 1996 (one thousand nine hundred andninety six), unless the Majority Lenders otherwise agree in writing.6 Whereas total cost incurred

In addition, domicile on which the Cilacap flourmill project is operated is within the jurisdiction of District Court of Cilacap andmost evidences confirming losses suffered by Plaintiff are in the premise ofCilacap flour mill which is within the jurisdiction of District Court of Cilacap.Accordingly, it has been correct to file the legal proceedings of this present civilcase to the District Court of Cilacap which has the competency to examine andjudge this present civil case;11 Whereas furthermore

This is pursuant to Article 1234 jo. 1313 ofIndonesian Civil Code which read as follows:363737Obligation is to give something, to do something, or not to dosomething. (Article 1234 of ICC) Agreement is an act with which one ormore persons bind themselves to one or more other people.

Amendment I No. 19 (see ExhibitPY);Whereas with regard thereto, it is found that CoDefendant sent letter toDefendant III via Nancy Tan regarding cost overrun of the total cost of the39171819project incurring since 31 December 1996 which, as calculated by CoDefendant at early January 1997, amounted to US$ 550,309.

(five hundredfifty thousand three hundred nine United States Dollar) (Exhibit P13);Whereas Defendant III replied CoDefendant's letter on 218t March 1997 viafacsimile (Exhibit P14) which essentially specified Defendant III recognitionof the cost overrun amounting to US$ 393,595.

memenuhi syarat kKedua karena pembuatannya dengan carainjection moulding, karena untuk masuk pos 64.02 harus memenuhisyarat pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup,ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platform byriveting;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

Putusan Nomor 1491/B/PK/Pjk/201911,12.13.14.pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which are producedin one piece usually attached to the base or platform by riveting

;(c) Slippers or mules without quarter or counter, the uppers of which,being produced in one piece or assembled other than by stitching,are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced in one piece (for example,bathing slippers);Bahwa dengan Explanatory Notes

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu.Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged onrivets or similar devices;(b) Clogs without quarter or counter, the uppers of which

(c) Slippers or mules without quarter or counter,the uppersof which, being produced in one piece or assembled otherthan by stitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counteror heelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached tothe sole by plugs which lock into holes in the sole;(f.