The provisions of paragraphs 1, 2 and 3 shall not apply if the beneficialowner of the interest, being a resident of a Contracting State, carries onbusiness in the other Contracting State in which the interest arises,through a permanent establishment situated therein, and the debt claimin respect of which the interest is paid is effectively connected with suchpermanent establishment. In such a case, the provisions of Article 7shall apply.8.

Where, however, the person paying theinterest, whether he is a resident of a Contracting State or not, has inaContracting State a permanent establishment, in connection with whichthe indebtedness on which the interest is paid was incurred, and suchinterest is borne by such permanent establishment, then such interestshall be deemed to arise in the State in which the permanentestablishment is situated.9.

Where, by reason of a special relationship between the payer and thebeneficial owner or between both of them and some other person, theamount of the interest, having regard to the debtclaim for which it ispaid, exceeds the amount which would have been agreed upon by thepayer and the beneficial owner in the absence of such relationship, theprovisions of this Article shall apply only to the lastmentioned amount.

Berdasarkan CANADA BORDER SERVICE AGENCY, Custom Notice N484,Ottawa, 26 Nov 2002 dan CBSA Statement Of Reason , Ottawa 9Desember 2002The distinctive feature of waterproof footwear is that both the sole portion andthe a portion of the upper, sufficient to give waterproof protection to the foot,are incorporated into a single component which may be made of rubber orplastic.Diterjemahkan oleh Penerjemah Resmi Dan Tersumpah : Harry F.

Majelis berpendapat bahwa Pos 64.01 sampai dengan pos 64.05dibedakan berdasarkan bahan penyusun outer sole dan upper ,Explanatory Noted Bab 64 Umum (B)+ Menurut pendapat pemohon banding ( kami ) penyataan diatas kurangtepat karena berdasarkan Harmonized System :Pos 64.01 Waterproof footwear with outer soles and uppers of rubberor of plastic, the uppers of which are neither fixed to the solenor assembled by stitching, riveting, nailing, screwing,plugging or similar processes.Pos 64.02 Other footwear

syarat kedua karena pembuatannya dengan cara injectionmoulding, Karena untuk masuk sub pos 64.02 harus memenuhi syaratpembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu.Bahwa pada penjelasan sub pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivets orsimilar devices;(6) Clogs without quarter or counter, the uppers of which

are produced inone piece usually attached to the base or platform by riveting;(c) Slippers or mules without quarter or counter,the uppers of which,being produced in one piece or assembled other than by stitching, areattached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the sole byplugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

However, attention may be drawn to art. 63(a) Fw, which may cause the pledgee and the hypothecary creditor temporarily notto enforce their rights to summary execution. Of course it is also possible that thereceiver fully settles the claim secured by pledge or hypothec, as a result of which therelevant security right is extinguished (art. 58 para. 2 Fw).B.

The shareholdershall have the right to vote in a general meeting, unless this right is attributed to thepledgee (arts. 2:89 and 198 BW; see also art. 2:24a BW).Furthermore, there are special rules applicable to the enforcement of a pledgeon shares, on which more will be said here.D.

As mentionedbefore, this right is a right of summary execution, which means that execution canbe effected without any judicial or similar title of enforcement, such as a judicial decision or a notarial deed. The sale must take place in public, barring judicial permissionfor a private sale.

*Then, a brief reference must be made to art. 3:259 BW, which provides for a special (statutory) right of pledge for holders of depositary receipts for shares to theshares for which the depositary receipts have been issued.

It occurs regularly that permission is requested for a private sale pursuant to art. 3:251 BW, which is usuallygranted, also in view of the fact that the proceeds of a private sale are often muchhigher than those of a sale in public.

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu.Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to thesole by plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

hukumPengadilan Agama Jakarta Utara;Bahwa, awal kehidupan perkawinanPENGGUGAT dan TERGUGAT hidupharmonis, namun ketentraman rumahtangga mulai goyah, yang disebabkankarenaterjadi = perselisihan danpertengkaran serta TERGUGATmelakukanPENGGUGAT;Penganiayaan kepadaBahwa, adapun pertengkaran = antaraChild";Whereas, after the marriage PLAINTIFFand the DEFENDANT have been livingin Apartment Block 102 Tower Road #03262, Singapore;Based on the provisions of Article 132paragraph (1) The Compilation os IslamLaw which

Hence, it is sufficient and in accordancewith the laws for the PLAINTIFF tosubmit the Divorce Lawsuit to the Courtlocated in the PLAINTIFF's residence,which is the jurisdiction of the NorthJakarta Religious Court;Whereas, in the beginning of their marriage,both PLAINTIFF and DEFENDANT?

jutarupiah) setiap bulannya sampai anaktersebut telah mencapai usia dewasa dandapat menentukan sendiri kehendaknya;Menetapkan biaya perkara menurut hukum.it can be declared the application fordivorce is granted;Whereas, the PLAINTIFF is able to pay allcosts arising from this case;Then based on the reasons / argumentsmentioned above, the PLAINTIFF requests/ appeals to the Head of the North JakartaReligious Court c / g, the Honorable Panelof Judges who will look and examine thecase, then grant the verdict which

dan Japan, disebutkan bahwa"Where :(a) an enterprise of a Contracting State participates directly or indirectly in themanagement, control or capital of an enterprise of the other ContractingState, or(b) the same persons participate directly or indirectly in the management,control or capital of an enterprise of a Contracting State and an enterprise ofthe other Contracting State, and in either case conditions are made orimposed between the two enterprises in their commercial or financialrelations which

differ from those which would be made between independententerprises, then any profits which would, but for those conditions, haveaccrued to one of the enterprises, but, by reason of those conditions, havenot so accrued, may be included in the profits of that enterprise and taxedaccordingly.

Jepang, mengatur bahwa:Article 9Where :(a) an enterprise of a Contracting State participates directly orindirectly in the management, control or capital of an enterprise ofthe other Contracting State, or(b) the same persons participate directly or indirectly in themanagement, control or capital of an enterprise of a ContractingState and an enterprise of the other Contracting State,and in either case conditions are made or imposed between the twoenterprises in their commercial or financial relations which

differ fromthose which would be made between independent enterprises, thenany profits which would, but for those conditions, have accrued to oneof the enterprises, but. by reason of those conditions, have not soaccrued, may be included in the profits of that enterprise and taxedaccordingly.2.6.

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

bilakenyataannya alas kaki tersebut tidak dapat melindungi dari masuknya airatau cairan lainnya maka tidak dapat menjadi waterproof footwear danharus keluar dari pos 6401;Berdasarkan Canada Border Service Agency, Custom Notice N484, Ottawa,26 Nov 2002 dan CBSA Statement Of Reason, Ottawa 9 Desember 2002;The distinctive feature of waterproof footwear is that both the Sole portionand the a portion of the Upper, sufficient to give waterproof protection to thefoot, are incorporated into a single component which

Putusan Nomor 1013/B/PK/PJK/2014Menurut pendapat Pemohon Banding (kami) penyataan di ataskurang tepat karena berdasarkan Harmonized System:Pos 64.01 Waterproof footwear with outer Soles and Uppers ofrubber or of plastic, the Uppers of which are neitherfixed to the Sole nor assembled by stitching, riveting,nailing, screwing, plugging or similar processes;Pos 64.02 Other footwear with outer Soles and Uppers of rubberor plastics;Pos 64.03 Footwear with outer Soles of rubber, plastics, leatheror composition

Putusan Nomor 1013/B/PK/PJK/201411.12.13.pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup, ditusukatau dengan cara semacam itu;Bahwa pada penjelasan sub pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(m) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(n) Clogs without quarter or counter, the Uppers of which areproduced in one piece usually attached to the base or platform byriveting

;(0) Slippers or mules without quarter or counter, the Uppers of which,being produced in one piece or assembled other than by stitching,are attached to the Sole by stitching;(p) Sandals consiting of straps across the instep and counter orheelstrap attached to the Sole by any process;(q) Thongtype sandals in which the thongs are attached to the Soleby plugs which lock into holes in the Sole;(r) Nonwaterproof footwear produced in one piece (for example,bathing slippers)Bahwa dengan Explanatory Notes

belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby nveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

., Advocate ofAli Budiardjo, Nugroho, Reksodiputro Counsellors at Law, having its domicile at GrahaCIMB Niaga, 24" Floor, Jalan Jenderal Sudirman Kav. 58, Jakarta 12190, in accordance withspecial power of attorney dated 7 November 2013, therefore is authorized to represent and toact for and on behalf of PT ZINKPOWER BATAM INDO, which is the Defendant in thecivil case No. 191/PDT.G/2013/PN.BTM at the District Court of Batam (hereinafter referredto as the DEFENDANT);And2.

Batubara and Associates having itsdomicile at Ruko Kurnia Djaya Alam Blok B16 Batam Center, Batam, Province of RiauKepulauan, in their capacity as AttorneyinFact under Special Power of Attorney dated 18October 2013, therefore is authorized to represent and to act for and on behalf of PT PAJARPERKASA MANDIRI, which is the Plaintiff in the civil case No. 191 /PDT.

Proyek PISP (Participatory Irrigation Sector Project);Dalam kontrak disebutkan halhal sebagai berikut:This Contract (hereinafter called the "Contract") is made on the 6thday of the month of December, 2006 between, on the hand,Directorate General of Water Resources (DGWR), Ministry of PublicWorks, Republic of Indonesia (hereinafter called the "Client") and,on the other hand a Joint Venture consisting of the following entities,each of which will be jointly and severally liable to the Client for allthe

DDC Consultants (hereinaftercollectivelly called the "Consultant).Sedangkan dalam General Condition of Contract juga dijelaskanbahwa "Joint Venture" means a Consultant which compries two ormore Peartners each of wich will be jointly and severally liable to theClient for all the Consultant's obligations under the Contract.a) Dasar Hukum UndangUndang Nomor 18 Tahun 2000 tentang PerubahanKedua Atas UndangUndang Nomor 8 Tahun 1983 tentangPajak Pertambahan Nilai Barang Dan Jasa Dan PajakPenjualan Atas

Proyek PISP (Participatory Irrigation Sector Project);Dalam kontrak disebutkan halhal sebagai berikut:This Contract (hereinafter called the Contract) is made on the 6thday of the month of December, 2006 between, on the hand,Directorate General of Water Resources (DGWR), Ministry of PublicWorks, Republic of Indonesia (hereinafter called the Client) and,on the other hand a Joint Venture consisting of the following entities,each of which will be jointly and severally liable to the Client for allthe

DDC Consultants (hereinaftercollectivelly called the Consultant).Sedangkan dalam General Condition of Contract juga dijelaskanbahwa Joint Venture means a Consultant which compries two ormore Peartners each of wich will be jointly and severally liable to theClient for all the Consultants obligations under the Contract.a) Dasar Hukum; UndangUndang Nomor 18 Tahun 2000 tentang PerubahanKedua Atas UndangUndang Nomor 8 Tahun 1983 tentangPajak Pertambahan Nilai Barang Dan Jasa Dan PajakPenjualan Atas Barang

Where a resident of one of the Contracting States and anyother person are related and where such related personsmake arrangements or impose conditions betweenthemselves which are different from those which would bemade between independent persons, any income, deductions,credits, or allowances which would, but for thosearrangements or conditions, have been taken into account incomputing the income (or loss) of, or the tax payable by, oneof such persons, may be taken into account in computing theamount

For this purpose, the term "control" includesany kind of control, whether or not legally enforceable, andhowever exercised or exercisable;Where a Contracting State includes in the profits of a resident ofthat State, and taxes accordingly, profits on which a resident ofthe other Contracting State has been charged to tax in that otherState, and the profits so included are profits which would haveaccrued to the resident of the firstmentioned State if theconditions made between the two residents had

Theissue is whether the marketer should be compensated asa service provider, i.e. for providing promotional services,or whether there are any cases in which the marketershould share in any additional return attributable to themarketing intangibles.

Where a resident of one of the Contracting States and anyother person are related and where such related personsmake arrangements or impose conditions betweenthemselves which are different from those which would bemade between independent persons, any income,deductions, credits, or allowances which would, but forthose arrangements or conditions, have been taken intoaccount in computing the income (or loss) of, or the taxpayable by, one of such persons, may be taken intoaccount in computing the amount

Where a Contracting State includes in the profits of aresident of that State, and taxes accordingly, profits onwhich a resident of the other Contracting State has beenHalaman 45 dari 68 halaman Putusan Nomor 926/B/PK/PJK/2017charged to tax in that other State, and the profits soincluded are profits which would have accrued to theresident of the firstmentioned State if the conditions madebetween the two residents had been those which wouldhave been made between independent persons, then thatother

Where a resident of one of the Contracting States and anyother person are related and where such related personsmake arrangements or impose conditions betweenthemselves which are different from those which would bemade between independent persons, any income,deductions, credits, or allowances which would, but for thosearrangements or conditions, have been taken into account incomputing the income (or loss) of, or the tax payable by, oneof such persons, may be taken into account in computing theamount

For this purpose, the term "control"includes any kind of control, whether or not legallyenforceable, and however exercised or exercisable;Where a Contracting State includes in the profits of a resident ofthat State, and taxes accordingly, profits on which a resident ofHalaman 30 dari 70 halaman.

Putusan Nomor 947/B/PK/PJK/2017themselves which are different from those which would bemade between independent persons, any income,deductions, credits, or allowances which would, but forthose arrangements or conditions, have been taken intoaccount in computing the income (or loss) of, or the taxpayable by, one of such persons, may be taken intoaccount in computing the amount of the income subject totax and the taxes payable by such person;A person is related to another person if either personparticipates

those which wouldhave been made between independent persons, then thatother State shall make an appropriate adjustment to theamount of the tax charged therein on those profits.

The issue is whether the marketer shouldbe compensated as a service provider, i.e. forproviding promotional services, or whether thereare any cases in which the marketer should sharein any additional return attributable to the marketingintangibles.

(b) Clogs without quarter or counter, the uppers of which areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock

belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XIl 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby nveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition , Volume 3, dinyatakan : TheHeading covers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter,the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

The Parties have agreed that the Contract is assumed to besuspended temporarily starting 30 September 1998, until thepolitical and economic situation in Indonesia will allow theProject to be continued, or until the date mentioned in condition3) below, which ever is earlier ; 2.

The Parties agree that once conditions conducive tocontinuation exist, and provided BTID wshes so to continue theProject, POC shall complete the Contract Works, until all phasesof work provided in the Contract are completed and secured,as contemplated in the Contract, upon terms and conditions(including the payment schedule of the above figures) to befinalized by the Parties at such time, which terms and conditionsshall be as nearly approximate those of the original contract aseconomic, political

Persetujuan Perdagangan Barang Dalam Persetujuan KeranKerja Mengenai Kerjasama Ekonomi Menyeluruh Antara NegaraNegara Anggota AsosBangsaBangsa Asia Tenggara Dan Republic Rakyat China), yaitu pada Annex 3 "RulesOrigin For The The AseanChina Free Trade Area", dinyatakan:Rule 2: Origin CriteriaFor the purposes of this Agreement, products imported by a Party shall be deemed tcoriginating and eligible for preferential concessions if they conform to the orrequirements under any one of the following:Products which

Articles collected there which can no longer perform their original purpose norcapable of being restored or repaired and are fit only for disposal or recovery of pof raw materials, or for recycling purpose(4; andk.

belumkelinatan memenuhi syarat kedua karena pembuatannya dengan carainjection moulding, karena untuk masuk pos 64.02 harus memenuhisyarat pembuatannya dengan cara dijahit, dikeling, dipaku, disekrup,ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Skiboots consisting of several moulded parts hinged on rivets orsimilar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platform byriveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced

belumkelihatan memenuhi syarat kedua karena pembuatannya dengancara injection moulding, karena untuk masuk pos 64.02 harusmemenuhi syarat pembuatannya dengan cara dijahit, dikeling,dipaku, disekrup, ditusuk atau dengan cara semacam itu;Bahwa pada penjelasan pos 64.02 pada halaman XII 64021Explanatory Notes, Fifth Edition, Volume 3, dinyatakan: The Headingcovers, inter alia:(a) Ski boots consisting of several moulded parts hinged on rivetsor similar devices;(b) Clogs without quarter or counter, the uppers of which

areproduced in one piece usually attached to the base or platformby riveting;(c) Slippers or mules without quarter or counter, the uppers ofwhich, being produced in one piece or assembled other than bystitching, are attached to the sole by stitching;(d) Sandals consiting of straps across the instep and counter orheelstrap attached to the sole by any process;(e) Thongtype sandals in which the thongs are attached to the soleby plugs which lock into holes in the sole;(f) Nonwaterproof footwear produced